Inspect the existing wiring
We examine the panel, visible wiring, outlets, switches, and signs of heat or damage to define the starting condition.
Whole-House Rewiring in Pittsburgh, Pennsylvania
We replace outdated wiring across homes and businesses in Pittsburgh. Our crew explains the work before it begins and checks each circuit for safe operation.
Licensed & InsuredFree EstimatesWarranty AvailableUpfront, Transparent Pricing
Whole-House Rewiring replaces aging or unsafe wiring throughout Pittsburgh homes and businesses. Flickering lights, warm switch plates, dead outlets, or frequent breaker trips can point to wider wiring problems. We inspect the system, trace circuits, and explain the next step before work begins.
What new wiring changes for your property
Fewer recurring faults across circuits, outlets, and switches.
A clearer circuit layout for future repairs, lighting work, or panel upgrades.
Grounding and connection problems receive attention as part of the wider wiring plan.
The property gets wiring suited to its present electrical needs.
About
How whole-house rewiring changes the wiring system
Whole-house rewiring replaces old conductors, damaged insulation, unsafe connections, and outdated circuit paths across the property. We may also address outlets, switches, lighting points, grounding, and panel connections when the inspection shows they need attention. The right scope depends on the wiring condition, access behind walls, circuit layout, and the electrical demand of the property. A repair may suit one isolated fault, but repeated symptoms across rooms often call for a wider review. Our team starts with circuit tracing and a condition check. We map what each breaker feeds, identify unsafe sections, and explain which parts require replacement. We don't recommend opening walls or replacing wiring without first defining the actual circuit path.
What Whole-House Rewiring Covers
Whole-house rewiring is an electrical service that replaces wiring across a property and reconnects circuits to the panel, outlets, switches, and lights.
- Whole-house rewiring differs from a single wiring repair because it evaluates and replaces the connected electrical system across the building.
- The service covers residential and commercial properties in Pittsburgh and nearby communities.
Process1 2 3 4 5
Steps we use to rewire a whole property
Trace and map each circuit
We test circuit paths and match breakers to rooms, outlets, lighting points, and major loads.
Plan access and replacement
We set the wiring route, device scope, grounding needs, and panel connections before removal or installation begins.
Install the new wiring
We replace the planned wiring sections and reconnect outlets, switches, lights, and circuit connections.
Test the completed system
We test circuits, connections, outlets, and protective devices, then explain the completed work and remaining recommendations.
What to prepare before whole-house rewiring
These details help us scope access, circuit use, and the property's electrical needs.
- List the rooms with flickering lights, dead outlets, or warm switch plates.
- Note which breakers trip and what was running at the time.
- Identify planned loads such as generators, EV charging, or new appliances.
- Clear access to the electrical panel, outlets, switches, and visible wiring.
- Share renovation plans that could affect walls, lighting, or circuit routes.
The Electrician Pittsburgh Standard
Problem Diagnosis
We inspect wiring, trace circuits, and identify faults before recommending property-wide replacement work.
Safe Operation
We test circuits, outlets, connections, and protective devices so the rewired system operates safely.
System Troubleshooting
We troubleshoot the existing system first, then match replacement wiring to the property's electrical loads.
Questions about rewiring an entire property
Who provides whole-house rewiring in Pittsburgh?
Electrician Pittsburgh provides whole-house rewiring for homes and businesses in Pittsburgh. We inspect the existing system, trace circuits, replace planned wiring sections, and reconnect devices and panel connections. Our team explains the scope before work begins and offers free estimates for the requested project.
Can a whole property be rewired without removing all drywall?
Whole-house rewiring can sometimes use existing access points, attic spaces, basements, crawlspaces, or carefully planned openings. The building layout and wire paths decide how much access is needed. We inspect those paths first, then explain where access may be required and how device locations affect the work.
What changes the cost of rewiring a whole house?
Rewiring cost depends on circuit count, access behind walls, wiring condition, panel connections, outlet and switch quantities, grounding work, and planned electrical loads. We review these factors during the property assessment. Our estimate explains the planned wiring scope and related electrical work before installation starts.
Is whole-house rewiring worth considering for repeated electrical faults?
Whole-house rewiring is worth considering when faults appear across several circuits or the existing wiring cannot support planned use. A single damaged outlet may need only a focused repair. We trace the system first, so the recommendation matches the spread of the problem and the property's electrical needs.
What should I do about a burning smell from an outlet?
A burning smell from an outlet requires immediate caution because heat can damage wiring and nearby materials. Stop using the outlet and keep clear of visible sparks or smoke. Our emergency electrical service handles urgent residential and commercial needs, and we diagnose the affected circuit before recommending repairs.
Does rewiring include the electrical panel?
Whole-house rewiring can include panel connections when the existing panel cannot support the planned circuit layout or load. The panel itself may need separate work, depending on its condition and capacity. We inspect the panel, perform a load review, and explain whether panel work belongs in the rewiring scope.
What information should I share before requesting an estimate?
A room list, known electrical symptoms, breaker information, renovation plans, and planned appliances help us scope the work. Photos of the panel and affected outlets can also support the initial discussion. We still inspect and trace the system before setting the final rewiring plan.
Also Offering Whole-House Rewiring
Allison ParkBaldwinBellevueBethel ParkBloomfieldBrentwoodCarnegieCarnot-MoonCastle ShannonClairtonDormontForest HillsFranklin ParkGlenshawJefferson HillsKennedy TownshipLawrencevilleMcKeesportMonroevilleMount LebanonMunhallNorth VersaillesPleasant HillsPlumSouth Park TownshipSwissvaleUpper Saint ClairWest MifflinWest ViewWhite OakWhitehallWilkinsburgWilsonAmbridgeEconomyCranberry TownshipCanonsburgLower BurrellMurrysvilleNew Kensington
Contact
Request a Whole-House Rewiring Estimate in Pittsburgh
Tell us about the property and its wiring concerns, and urgent requests get priority scheduling.
Scenarios
When Customers Call Us About Whole-House Rewiring
1
Older Wiring With Repeated Breaker Trips
Repeated breaker trips across several rooms can point to more than one overloaded outlet. The wiring layout, insulation, panel connections, and grounding path all matter when the faults spread through a property. Stop using any outlet that smells hot or shows scorch marks, then request an inspection so we can map the circuits and define the rewiring scope.
2
Renovation With New Electrical Loads
A renovation can expose wiring that cannot support new lighting, appliances, or other electrical loads. Whole-house rewiring may fit when the existing circuit paths are old, damaged, or difficult to expand safely. Gather your renovation plans and appliance list, then have us review circuit capacity, panel connections, and outlet locations before walls close.
3
Two-Prong Outlets Across The Home
Two-prong outlets across a home can indicate older ungrounded circuit paths. Replacing only the visible devices may leave the wiring and grounding problem untouched. Avoid using damaged adapters, note which rooms need grounded power, and ask us to trace the circuits before choosing between targeted repair and a broader rewiring plan.
Our Other Services
Generator RepairA generator that fails to start may leave sump pumps, refrigerators, or heating systems without backup power. We diagnose batteries, controls, transfer switches, and wiring, then repair the fault and verify operation.
Generator InstallationA standby generator keeps essential systems running when utility power fails. We install the generator, transfer switch, fuel connection, and required wiring, then test the setup for safe backup power at your property.
Recessed Lighting InstallationDark kitchens, hallways, and living spaces benefit from well-placed recessed fixtures. We plan openings, install IC-rated housings where needed, connect dimmers, and create even ceiling lighting without cluttering the room.
Ceiling Fan RepairA wobbling fan, failed light kit, or humming motor makes a room uncomfortable and can signal wiring trouble. We inspect the fan switch, mounting, motor, and connections, then restore safe operation.
Emergency Electrician ServiceA burning smell, sparking outlet, or sudden outage needs attention before the danger grows. Our 24-hour electricians trace the fault, isolate unsafe circuits, and restore safe power for your home or business.
Electrical TroubleshootingFlickering lights and tripping breakers often point to faults hidden behind walls or fixtures. We test circuits, outlets, switches, and connections to identify the cause and give you a clear repair plan.
